I am soooo greatfull for all your help you have no idea how much stress you have wiped out my fingers are crossed still thank you so much
Posts made by jobesynoob1234
-
RE: bltouch v3.1 help๐
-
RE: bltouch v3.1 help๐
this all probably could have bean easier if i could have uploaded videos
-
RE: bltouch v3.1 help๐
@Phaedrux well it worked faster probed center 3 times this time before going home so does this now mean i can sort my z offsets and G30 S1 should work
-
RE: bltouch v3.1 help๐
ooops forgot to say self test runs then stops after about 10 retract/deploy then stays solid red
-
RE: bltouch v3.1 help๐
@Phaedrux things are getting a bit exciting now i hit home all it then homes x then y the moved to center and probed then the second time then ended like this was it supposed to do it slooooow
-
RE: bltouch v3.1 help๐
@Phaedrux right i have now cut/pasted it to the top on all 3time to test it
-
RE: bltouch v3.1 help๐
@Phaedrux i dont have a g90 or g30 should i copy and paste
-
RE: bltouch v3.1 help๐
i also added this line to homeall and homez M280 P3 S10 I1 ; Alarm Release and Push-Pin down i altered it but i always end up manually having to deploy the pin
-
RE: bltouch v3.1 help๐
there must be something wrong in my settings. what i just did was homed the X then Y then set the probe with pin out then homed it it then keeps flashing once homed then every time I push home z it keeps moving up 10mm or so
-
RE: bltouch v3.1 help๐
@Phaedrux i will give it a go but i think i better let that abs/acetone dry a bit more first just in case
-
RE: bltouch v3.1 help๐
@Phaedrux i believe that I may have put the tread inserts in a bit wonky i will try some springs and abs
-
RE: bltouch v3.1 help๐
the pin is fine i carefully placed it in my cordless drill the probe seams to lean to the left a bit