@jay_s_uk I am away at the minute, but will have a look and report back. Many thanks
Best posts made by jer1001
-
RE: Rare negative readings from filament sensor causing pauseposted in Filament Monitor
-
RE: Sensorless homing not working with Duet 3 miniposted in General Discussion
@gloomyandy I owe you for that one, many thanks indeed. It is homing on this, will revert at end of homing to spreadcycle. Thanks again
; homex.g ; called to home the X axis ; ; generated by RepRapFirmware Configuration Tool v3.5.0-rc.2+3 on Mon Jan 15 2024 12:53:37 GMT+0000 (Greenwich Mean Time) M569 P0 D3 V0 M915 H200 X Y S3 R0 F0 ; set sensorless homing ; lift Z G91 ; relative positioning G1 H2 Z5 ; move Z relative to current position to avoid dragging nozzle over the bed G90 ; absolute positioning ; home X G1 H1 X-300 F3000 ; coarse home in the -X direction G1 H2 X20 F1500 ; move back 5mm ;G1 H1 X{-var.maxTravel} F300 ; fine home in the -X direction ;G1 H2 Z-5 F6000 ; lower Z again