Topics created by Gundurssonson

Good idea, I forgot about the problems with 3.01 and tried to update directly.
I've now gone to 3.0 and after that to 3.01 and now everything is fine.

Thank you

M305 P0 T100000 B3950 C7.06e-8 R4700 ; Set thermistor + ADC parameters for heater 0
M305 P1 T100000 B4725 C0 R2200 ; Set thermistor + ADC parameters for heater 1

Your thermistors are configured wrong.

Duet Maestro uses R2200 not R4700

Its either (B4725 and C7.06e-8) or B3950 and C0. you got them mixed.

also your steps seem odd for a anet a8
M92 X95.68 Y95.14
normal for an anet is 100

I don't know what you just did, but after I redid my wiring it now works again. Thing is, I could've sworn all wires were secured properly
For the record, I had about 5.4 on the lowest (200) Ohm setting of my Multimeter for all the wires.

I could kiss you right now, thank you.