Topics created by gratefulfrog

Yes, change the M190 command to M140. Also put the T0 command before the G28 if you want to start the extruder heating before homing.

Indeed, the problem in the homing files.

In fact, I have now updated the following sys files:

config.g

bed.g

homex.g

homey.g

homez.g

homeall.g

I also updated my slicer pre and post print gcode in accordance with what I learned in this discussion.

The result is that all problems are solved!

I did a test print and it worked perfectly!

Thanks to everyone!

With my most sincere appreciation,
Ciao,
Bob

Thanks!

I'll give it a try!

BTW, I managed to upgrade the firmware to 1.18 and it seems to work so far!

Cheers,
Bob