Posts made by fma

@droftarts Thanks. I'll ask my cousin to check.
In the meantime, he tested the ISO prostprocessor, which seems to work fine.

Mmm, Blender CAM generates strange G-Code:

G0X0Y0Z10
X3.477Y3.144
G1Z0F500
G0Z10
X3.666Y3.004
G1Z0
G0Z10
X3.868Y2.883
G1Z0
G0Z10
X4.081Y2.782
G1Z0
G0Z10
X4.303Y2.703
G1Z0
G0Z10
X4.531Y2.646
G1Z0
G0Z10
X4.764Y2.611
G1Z0
G0Z10
X4.999Y2.599
G1Z0
G0Z10
X5.235Y2.611

For lines only containing X/Y coords, G-Code simulators use the previous command (G0, here), but RRF does not seem to understand such lines... Do you confirm?

Hi!

My cousin bough a used CNC which is running with a Duet2 board.

As he knows Blender very well, he would like to use Blender CAM, which does not output GCode for RRF. Which machine should he use, from this list:

• Iso
• Mach3
• LinuxCNC
• Fadal
• Heidenhain (530, TNC151)
• Sieg KX1
• Hafco HM-50
• Centroid M40
• Anilam Crusader M
• Gravos
• WinPC-NC
• ShopBot MTC
• Lynx Otter o

Is GRBL ok?

Thanks.

Hi!

As I switched to a Duet3 Mini for my FLSUN SR, I'm selling:

• 1x Duet2 wifi board (wifi module has external antenna): 80€
• 1x Duex5 expansion board: 60€
• 1x PaneldDue Controller + 7" screen and custom enclosure: 50€

(only to Europe).

@droftarts if you look at the Laser filament monitor doc page, the first picture shows a v1.2 PCB

Thanks for the infos and the link to the indirect mod!

I have a v1.2, not a v1.7; is it ok?

Does it work with 3.3V, like recent sensors? I don't have any free input with 5V power supply.

The modified version could be interesting...

Hi!

I still have one of the early laser filament monitors, using direct reading, with a PCB rev. 1.2, and I would like to know if it is still supported on a Duet3 Mini 5+?

I just want to use it as a runout sensor, and maybe as jammed sensor if it works reliably... What is the basic config (M591) for such use case?

Thanks,

@dc42 Thanks! I do have a Z-probe.

@droftarts Thanks for the drawing!

What accuracy (%) is needed for the different values?

Hi!

I'm configuring RRF for my FLSUN SR, and I'm not sure to understand the different values used by the M665 command... Is there a drawing showing how these dimensions are measured?

I found config files on 2 threads in this forum, but values seem to be the default ones generated by the online tool, and do not match the printer.

Thanks,

@rqthree Thanks, I'll read the entire thread again to see how other guys do...

@rqthree BTW, how do you get the sharp edge on the flanged bearing? With a lathe?

@rqthree Ok, I see!

@rqthree There is a problem with these files: Carrier_Assy.FCStd and Knife_Bearing.FCStd ; I'm unable to open them, neither other people at my hackerspace (they freeze or crash FreeCAD).
Could you save them as STEP files?
Thanks,

@rqthree Thank you very much!

@rqthree very cute extruder!

Do you have some more informations about the motors and all vitamins used? Would you share your 3D models?

Thanks,

@Fred-Y Thanks, I'm interested by your adapter, if you can find it...

About the flying extruder, I did consider it, but I'm afraid it won't be as good as a direct-drive.

Hi!

So, I used my stock FLSUN SR for several months, and it's now time to switch to Duet3/RRF!

I would also like to replace the Bowden extruder by a direct one. Do you have any suggestions? At the same time, I plan to mount a Smart Effector: do you confirm it is compatible with the SR? The arms balls do not seem to be maintained in the same way...

Thanks,

@teddphilipss The big problem I found is the clearance between the extruder and the rods, when the effector tilts. It needs a large effector. Or use a Bowden config, which I don't like very much (I will soon switch to a direct extruder on my FL SUN).

No, I didn't do anything. I bought a FLS SUN SR2 ! I may put a 2 axis (A/B) system on the bed, one day...