Topics created by donpedro

@donpedro I've moved JadonM's menu system to the top of the list of menu systems here https://docs.duet3d.com/en/User_manual/Connecting_hardware/Display_12864_menu#configuration and added a note about it currently being the only one to support printing from the external SD card on the display.

Ian

Closing due to inactivity.

@donpedro said in Accurate dimensions:

I don't think it helps me because this difference is not constant, I could adjust it from the slicer if it was like that, but it doesn't work
I have for example the following values on one axis, as the others differ
24.68
19.78
14.82
9.95
5.06

It looks to me that you have a scaling error of -2% plus an excess extrusion width of 0.75mm on each side. That would give actual sizes of 24.65, 19.75, 14.85, 9.95 and 5.05 which are very close to what you measured.