@moth4017 we'll need to see your config.g file and your homing files.
Controversial posts made by dc42
-
RE: need Guru on duet 3 mini5 using stall guard/sensor less homing
-
RE: Z axis will not change layers during a print
That's a puzzle! M115 Uxxx will behave just as M115 with no parameters, i.e. return the current firmware version. G80 will return a "not supported" message but is otherwise harmless. I have just tested both.
-
RE: Wifi empty
@ziggymanpopo said in Wifi empty:
It's always worked before
Before what? Before you changed your router?