Thank you very much, it was not easy for me but atleast, I m connected to my wifi extender, not it is time to fine tuning

Thank you very much, it was not easy for me but atleast, I m connected to my wifi extender, not it is time to fine tuning

Hi after some working to try to change my network, cancelling the older network, I fail to update my new network from YAT or even from macro so I decided that maybe if I erase my duet, it should be fine.

Now that the duet is erase, YAT can t send g code or m code to the duet so I download Bossa and follow the procedure to push the firmware to the duet wifi.
It say to erase all, lock and boot from flash than choose the firmware but when I choose 1 of the firmware available from the last version for the duet wifi 2 , it still can t be controll from YAT and I can t push anyother bin file because it say it is lock . So I wonder what files should I write with Bossa to the duet? Should I install only one file or I install the wifi modul also and other files aswell?

So Basicly, how from a erasse duet wifi with the usb connected can I write the new firmware to the duet?

Thank you

@Phaedrux thank you very much but I allready try that option also. I wish for any other way to force a setting without the need of PID autotune🥲

Small update to this post. I was previously using 500w heater with the old version firmware and was easily heating my chamber . Since the new firmware, it was not able to heat the chamber higher than 40 deg C. I try to do a auto tune pid of the chamber and it allways fail to finish the auto tune. The heated chamber is set in bang bang configuration. The heater is working on 110v so the duet control arelay 24v to 110v from the second heater from the duet card. So at some point, I decided to update my heater to 700w heater and I put bigger fan to have more airflow. Final result, I was able to heat up to 40deg C than fail. Now I don t know what to try. I don t belive a 1000w heater will be my solution because it was working fast with the 500w before the firmware update. It should just be faster now with the 700w and bigger fan

@dc42 I always use a sdcard because I need a wifi booster but I don t have any. I got some trouble lately that make me belive my sd card is the only thing that where not try yet.

@infiniteloop here is the file. it is available for 7 days https://www.transfernow.net/dl/20230120EGawtxia

Thank you

@infiniteloop the m122 was done after the error hapen, the printer was never close after the event.

I will look at dropbox to send the file. Now I m suspecting a bad sd card maybe

Here is the line that should have fail

so here is the m122 , for the gcode, it say my file size is too big too share, so how to ? file size is
29 921kb

console.txt

@daoust ![alt text]