Topics created by DannyCurran

Hi Danny,
I am mechanical Engineer and i have my own job that we make plastic injection mold. So we have 3 EDM machines and CNCs..
I used several CAM programs and now i use PowerMill. I just build my 3D printer with duetwifi , duex2 and paneldue 7". I am suffering from slicers because i can't control everything but I get used to it all day.
I developed all electric plastic injection machine controller by using PIC32MZxx now it is testing phase.
Cafer

Until you have a Z probe, you can set the Z probe type to 0 in the M558 command (M558 P0). Then you can run delta calibration as normal (see https://duet3d.dozuki.com/Wiki/Calibrating_a_delta_printer)) and the web interface will prompt you. If you just want to establish an accurate Z=0 height before printing, position the nozzle over the centre of the bed and send G30.

HTH David