Topics created by DaGWerkz

Your Bad Ass BTW!

it did overheat while pid tuning twice it faild and got super hot. but still worked. then I ran a print and heard a pop and then printer haulted due to heater fault. now I have it tore apart. gonna order new heater. you could be right that the thermistor came loose. not sure what caused it but it was expensive mistake

It was not having m501 in my config. Works perfectly now. Thanks!!

I must of shorted the fet. having repaired. thanks

A Duet + PanelDue with 7" screen draws too much power for a normal USB port to supply. This is why you see the flashing. With a 5" screen it is marginal. A solution is to supply additional power via the USB port on PanelDue from a second USB port on the PC, or from a powered USB hub, or from a USB power supply.