Topics created by cichaczech

@cichaczech I only tested it from the console too. Perhaps it only works for isolated moves. I'll look at it again on Friday.

@cichaczech

The list of object model values is at

https://github.com/Duet3D/RepRapFirmware/wiki/Object-Model-Documentation

The list of meta commands is at

https://docs.duet3d.com/en/User_manual/Reference/Gcode_meta_commands

@cichaczech thanks for confirmation! The fix will be included in 3.5.0-rc.1. I'll mark the Github issue I created at https://github.com/Duet3D/RepRapFirmware/issues/869 solved.

dc42 created this issue in Duet3D/RepRapFirmware closed [3.5beta3, beta4] Unexpected reset when using laser mode #869

@Veti said in G30 start Gcode:

you can not use z max endstop and probe at the same time.

Well you could use one then the other.

Thank you, finaly yesterday I had a time to work on my printer 🙂 I was confuzed by the mixing extruders.

Wow, you are really the best 🙂 thank you.
So for me is the best to stick with the conventional origin front-left, mainly for compatibility with slicers or some controlling softwares.
The thing is that printer will be working with multiple tools. Some larger, some smaller, longer..... And the only point which will be unaffected with tool change is rear-left.
I will change the config.g and home__.g
Thanks again. 🙂

I would appreciate this feature as well.

I would primarily be interested in total print time and the total filament used. The number of crashes detected with stall guard would also be nice, but not necessary.

I think it would be useful to enable/disable from config.g, but at least for my purposes having it always enabled would not be a problem.