Posts made by CaysonP

Im getting an error on my Duet Wifi saying Error: unsupported command M1001.
Any help will be greatly appreciated!!

My end stop voltage needs 6.8V to be active. is there a way i can change voltage in the firmware?
If not there is a way, can someone please ad a link so i can buy some

When i start the command to M552 S0 it completes and says idle. i start the command M587 to load my network and password, all i get is M587 SNETGEAR
i do not get the S"netgear, it is all uppercase and i have no chose to add anything else. i cant find in the instructions where to fix this problem. If you could point me in the right direction that would be great!

Im willing to pay someone to fix my boards. I can give you remote control of my computer to fix it and set it up for me.

is there a software i can use to control the DuetWiFi from my computer and bypass the PanelDue?

will the Paneldue work not plugged into the duetwifi?

still no luck, i have a black screen that wont turn on. ive checked wiring and made sure its not 1 pin off or backwards.

https://imgur.com/a/DEpnk
Is that it?

That command i think got me closer but still no go.
https://imgur.com/a/XQTWN

I feel im missing something stupid…....

still no luck.
i think my problem is the command promt.
is says
"file name" is not recognized as an internal or external command, operable program or batch file.

https://imgur.com/a/0UFVp

Thank you!!!

How do i post a picture. when i click image i get this. [ img]
I tired dragging and dropping. copy paste.

I have tried that… i am not smart in this area.
I am willing to ship this board and screen back, and re-order and i will make sure i DON'T touch the erase button.
That will be easier for me as i do not understand these instructions.
unless there is another way or its something simple im not understanding correctly.
I am not in anyway frustrated or upset at Duet.

"Identify the COM port number or port name of the PanelDue board on your PC. If you use Windows, you can do this via Start->Control Panel->System->Device Manager. Expand Ports (COM and LPT), and look for Bossa port. Make a note of the port number. If you can’t find the port, try repeating the Erase and Reset sequence, or disconnecting and reconnecting the USB cable, or try a different USB port on your computer. Note: the port number of the Bossa port for PanelDue will not be the same as the one you use when uploading firmware to Duet electronics.

Use bossac to program the board. Under Windows, open a command prompt and use this command:

bossac.exe –port=COM9 -e -w -v -b PanelDueFirmware.bin

Replace COM9 in this command by the COM port number you found, and PanelDueFirmware.bin by the path to your downloaded firmware file. It is possible to use the interactive version (Bossa) instead of bossac, but if you do then you must check the Erase All, Lock, and Boot from Flash boxes."

This is where it did not continue to cooperate. the command did not go through. here is what it said,
C:\Users\CCWCF>bossac.exe --port=COM9 -e -w -v -b PanelDueFirmware.bin
'bossac.exe' is not recognized as an internal or external command,
operable program or batch file.

I tried that. no luck. unless the main duet board has the same issue. i am giving it 24.3 volts.

Yes I did do all the checks you suggested.

I may have pressed the erase button… i am not sure.
from what it sounds like i did press the erase button.
If i have clear instructions of how to reprogram the firmware i may-be-able to do so. but most likely not as i failed on the MKS Gen V1.4 and had a Facebook friend come fix what i did wrong.

I have a software called TeamViewer, Is it possible for any of you to Take control of my PC and Do this for me… I am very mechanically inclined, I am not at all coherent in this computer world.

I have the PanelDue 5"

I plugged all my wires into the board and turned it on and the screen does not turn on.
Is there an update i need to perform to make it all communicate?
I have the Tevo Black widow, with all duet driving hardware.
The board I now have is duet wifi and the touch LCD display.
if there are updates how do i go about doing that.
Sorry i am new to this.
Any help is Greatly appreciated!!