Topics created by Bowski

So it's working 🙂 I switched the Endstop of the Y-Axis to Y Positive and inverted the endstops in the configuration.

@jay_s_uk Thank You! Now I am connected and already load my configuration. In all getting started guides i found the first point to connect via usb. Your answer was greatful 🙂

@dc42 the STATUS LED was flashing once a second.

@jay_s_uk thanks for this great link.

@nightowl after solving some other issues I made my own configuration with RRF and compared it with your config. Now i made the upload and have to wait until i am in front of my machine.