@Phaedrux Thanks again, I didn't realize that the firmware had to be done in steps. I original ran the most current firnware weeks ago and called it a day. Last night I got it all updates done with no issue, now to work on the setting for the mc touch and direct extruder. Thank for all the info provided
Best posts made by Borgtribble
-
RE: need help with config.g for cr touch and swiss drive
-
RE: Nozzle probes off bed.
@Turbo ALL FIXED got it working so I'm all good! I'm using G29 in the bed.g and got the first bed mesh mapped out. Currently my resin printer is making a mount to go on the left side. This will allow me to probe more of the bed :). I learned quite a bit since I botched this probe offset, with the new knowledge I plan on make the best bed mesh I can. Again thanks for all the help everyone, and Turbo you did a lot here so I'm going to name my Printer "Turbo" (Hopefully no more issues from here!)