@EasyTarget This is really useful tool! Thank you!
Posts made by berniej
-
RE: serialOM.py : easy ObjectModel access for Python and microPythonposted in Third-party software
-
RE: Store location of stall detection to variable.posted in Gcode meta commands
@gloomyandy Thanks for the reply. I will try containing the G1 H4 in a macro with my settings for stall detection. I was not aware of the H parameter in RRF 3+.
-
Store location of stall detection to variable.posted in Gcode meta commands
Hi all,
I am trying to figure out how I can use either sensorless homing or stall detection to measure the length of a single axis.
Ideally, I trigger a macro that sends one axis away from the home position until it hits the end of its travel - then stores that location in a variable.
I understand there will be limited accuracy due to the loss of steps, but that is ok for my application.
Any help or direction would be greatly appreciated!