@phaedrux Hello, yes. at the beginning I have just the line M569 P0.3 S1, I change S1 to S0 I have only one nema that work.
I add:
M569 P0.3 S0
M569 P0.4 S0
M569 P0.5 S0
Before M584
And there is ok
I'm an electrotechnician and maker.
I love the 3D printers maybe more of than 3D print :-D
@phaedrux Hello, yes. at the beginning I have just the line M569 P0.3 S1, I change S1 to S0 I have only one nema that work.
I add:
M569 P0.3 S0
M569 P0.4 S0
M569 P0.5 S0
Before M584
And there is ok
Hello ! I updated my firmware with the help of jay_s_uk. Now when I use my Android tablet all the DWC features are no longer accessible. Before I could see the menu to control my hotend and now it's impossible. Is it possible to reorganise the windows please?
@fcwilt Thank you very much, I try this week and I tell you if It's works
@fcwilt Yes I saw here the order of Z steppers :
https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors#Section_Prerequisites
Hello,
I think I don't need a hight torque.
Yes I use 6HC with toolboard 1LC, my firmware is 3.5.0-beta.4 .
I've just added D3 V0 on XY and Z, and sent a G32 for testing, the result is magnificent when the bed goes up but when it goes down the noise is the same because the speed is fast and I believe the spreadCycle is activate.
For X and Y too, I think I need to change the acceleration parameter.
Thanks
Edit: Ok, I left that idea aside, I see my printer's motors doesn't like it too much, when all I'm doing is moving the head at 1250mm/min.
I hear footsteps jumping.
Auré
Hello !
Can you help me please, for set the silent mode on my printer.
I live in an apartment and prefer silence to speed.
I see a tutorial on Duet doc but I never set the stealthchop and I don't know how to.
Thank
; Configuration file for Duet 3 (firmware version 3)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool v3.2.3 on Fri Jun 04 2021 20:14:20 GMT+0200 (heure d’été d’Europe centrale)
; General preferences
G90 ; send absolute coordinates...
M83 ; ...but relative extruder moves
M669 K1 ; select CoreXY mode
; Drives
G4 S4 ;wait for expansion boards to start
M569 P0.0 S0 ; physical drive 0.0 goes forwards
M569 P0.1 S0 ; physical drive 0.1 goes forwards
M569 P0.3 S0 ; physical drive 0.3 goes forwards
M569 P0.4 S0 ; physical drive 0.4 goes forwards
M569 P0.5 S0 ; physical drive 0.5 goes forwards
M569 P121.0 S1 ; physical drive 121.0 goes forwards
M584 X0.0 Y0.1 Z0.3:0.4:0.5 E121.0 ; set drive mapping
M671 X-18.109:183.1:384.309 Y-10.413:367.797:-10.413 S50
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X160.00 Y160.00 Z800.00 E335.40 ; set steps per mm
M566 X500.00 Y500.00 Z30.00 E120.00 ; set maximum instantaneous speed changes (mm/min) // avant M566 X1200.00 Y1200.00 Z30.00 E120.00
M203 X18000.00 Y18000.00 Z1800.00 E1200.00 ; set maximum speeds (mm/min)
M201 X500.00 Y500.00 Z100.00 E250.00 ; Réglage accelerations (mm/s^2)
M906 X1260 Y1260 Z1350 E960 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout
M591 P1 C"121.io1.in" S1 D0 ; filament monitor connected to E0 endstop
; Axis Limits
M208 X0 Y0 Z0 S1 ; set axis minima
M208 X365 Y355 Z335 S0 ; set axis maxima
; Endstops
M574 X1 S1 P"121.io2.in" ; configure active-high endstop for low end on X via pin 121.io1.in
M574 Y1 S1 P"io0.in" ; configure active-high endstop for low end on Y via pin io0.in
M574 Z1 S2 ; configure Z-probe endstop for low end on Z
; Z-Probe
M950 S0 C"121.io0.out" ; create servo pin 0 for BLTouch
M558 P9 C"^121.io0.in" H15 F120 T9000 ; set Z probe type to bltouch and the dive height + speeds
G31 P500 X3 Y-41 Z3.676 ; set Z probe trigger value, offset and trigger height
M557 X15:215 Y15:195 S20 ; define mesh grid
; Heaters
M308 S0 P"temp0" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin temp0
M950 H0 C"out0" T0 ; create bed heater output on out0 and map it to sensor 0
M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
M140 H0 ; map heated bed to heater 0
M143 H0 S90 ; set temperature limit for heater 0 to 100C
M308 S1 P"121.temp0" Y"thermistor" T100000 B4725 C7.06e-8 ; configure sensor 1 as thermistor on pin 121.temp0
M950 H1 C"121.out0" T1 ; create nozzle heater output on 121.out0 and map it to sensor 1
M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
M143 H1 S260 ; set temperature limit for heater 1 to 280C
; Fans
M950 F0 C"121.out1" Q500 ; create fan 0 on pin 121.out1 and set its frequency
M106 P0 S0 H T45 ; set fan 0 value. Thermostatic control is turned on
M950 F1 C"121.out2" Q500 ; create fan 1 on pin 121.out2 and set its frequency
M106 P1 S0 H-1 ; set fan 1 value. Thermostatic control is turned off
; Tools
M563 P0 D0 H1 F1 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
; Custom settings are not defined
; Miscellaneous
M501 ; load saved parameters from non-volatile memory
M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss
@chrishamm Hi thanks you for your answer. Ok I see now. I don't understand why this menu been moved on mobile version, It's not possible to control all the axis, the hotend and the bed on the same page.
I have upgrade but the result is the same. So I continue with the computer version display on my tablet.
@Phaedrux Yes I use a PI 3B+. I try to update tomorow for get the Beta 4. I have send a message at @chrishamm for this problem. When "display the computer version" is activate I can use the hotend features menu. But the size is a little lower, but it's possible pinch-to-zoom. For information my tablet run with Android 7.
@Phaedrux said in Features menu:
what screen size and resolution is the tablet?
Screen size 10.1 and resolution 1280*800
@Phaedrux @Hi! I didn't know about the site version parameters. So I looked around and found a option that allows you to activate "display the computer version".
Nobody have a probleme for show the feature menu? I can't use my printer with my tablet.....