See you all there.
Posts made by adam2070
-
RE: Limited service from me for 1-2 weeks
That sounds exciting, Hopefully, I will see you showcasing the BETA boards at TCT this year.
-
RE: Precision Piezo Andromeda
Thanks for the inspiration. When I have time to design something i will make sure i post it.
-
RE: Precision Piezo Andromeda
@SupraGuy I am about to try this on my DBOT can you send me a picture of your sensor mounts I am looking for inspiration.
-
RE: Piezo Orion...Has anyone got it to work?
@3dmntbighker I totally agree with you and that is one of the reasons. I have not released the files for the design. I plan to change the fan setup as well as save some Z hight. I am also considering changing over to a Mosquito Hotend.
On the auto levelling side, I am happy with the Orion over the IR setup I was using before.
-
RE: Piezo Orion...Has anyone got it to work?
@craig Let me know if you need any more help happy to have a chat.
-
RE: Multi-material filament feeder/repurpose E1 stepper driver
Looks really interesting, i will keep an eye on this, I like the idea of a completely duet compatible solution.
-
RE: Piezo Orion...Has anyone got it to work?
There is not much in my config to do with this. My issues getting it going ware more hardware based this is a snippet of my config file.
; Endstops
M558 P1 I1 R1 F300 A3 X0 Y0 Z0
M574 X1 Y1 Z0 S0; Define active low and unused microswitches; Z Config
G31 X0 Y0 Z-0.1 P600; Set Z probe trigger value, offset and trigger height
M557 X35:280 Y35:280 S40; Define mesh gridThese might be of help.
-
Probe the bed(Hot) with a cold hotend and the fan off with thermal control. (Might be an issue not having an always-on heatsink fan)
-
My bed is held up on PCB mounts not springs if you use springs might be worth making sure they are compressed.
-
I did play around with the mounting for my printer and redesigned it has the standard hot end mount failed on my printer
-
I found probing multiple times helps pick up issues forgetting to clean the nozzle etc
-
The Z offset of G31 can change depending on the build bed surface I am using.
-
-
RE: Piezo Orion...Has anyone got it to work?
Hi,
Mine works well I am pleased with mine after some playing. I designed a new mount for mine for the DBOT I am working on which solved most of my issues.
If you need any help, let me know I am not an expert but have experimented a lot to get it to the point I am happy with.
Adam
-
RE: Laser filament monitor
@t3p3tony Please add me to the list to purchase beta board. i have been looking forward to testing one out since moving from ramps to DUET.
-
RE: Power/USB issue faulty board?
Thank you for the advice.
After a bit of playing around the board is working fine without the LAN Module when I control the board over USB. so looks like I can get away with just replacing the LAN Module.
where can i purchase a replacement LAN module? I have just ordered another duet from this site so if I can add one to that order that would be fantastic.
Thanks
Adam
-
Power/USB issue faulty board?
Hi.
I have an issue with my duet ethernet in the core XY I am building. Today I have not been able to power the board up at all just some of the LEDs and the LEDs on the expansion board ware flickering. I assumed there was an issue with the firmware so tried to reflash the board with no luck I have since removed the board from the machine and now just have 3 red LEDs flickering when I plug in the USB and the computer will not detect the board when trying to reflash the firmware. I also noticed the board is very hot around U2 and the network interface.
Any ideas? or is it a case of buying a new board
-
RE: What to add next?
I am currently building a similar setup and working my configuration files at the moment. I am currently debating the following upgrades.
- Dual Bowden Y-splitter setup for dual colour printing
- LCD Display of some kind
- Magnetic removable build platform.
- Fillment sensors.