Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Ender 3 using DUET 2 Maestro w/Panel Due 5i (Homing Issue)

    Tuning and tweaking
    2
    2
    233
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • bfpa40undefined
      bfpa40
      last edited by

      I have a Ender 3 printer which I just installed the DUET 2 Maestro on. My first question is there someplace online that has a guide for what to setup in the RepRapFirmware for this Printer? I am having issues with homing. Is the home position where the endstop switches are located? My X axis moves away from the endstop switch when i press the X Home Button once arriving there grinds and tries to continue causing me to have to power off the printer. Now when I press the Y Home button the hotbed travels toward the endstop switch but once arriving there grinds and tries to continue causing me to have to power off the printer. The Z axis when i press the Z Home button it travels 2.50 units upward and stops each time I press Z Home.
      I know there has to be someone who can offer guidance as to what to do in order to get me started in the correct programming sequence.

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        https://duet3d.dozuki.com/Wiki/Connecting_endstop_switches

        https://duet3d.dozuki.com/Wiki/Test_homing_behaviour

        https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCartesianPrinter

        These links should help.

        I believe that endstop switches will need to be wired to the 2 outside pins of the connector.

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA