Ender 3 Pro, Stock Fans with Duet Maestro?

[JimPBarber]

Hi, I just ordered a Duet Maestro and after looking at the specs and youtube vids, I am confused whether or not I can use my stock 24v fans.

I can upgrade, but would prefer to have the parts on hand when my new board arrives. A bit of a newbie so, help is appreciated.

[Phaedrux]

https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans

If you have a 24v PSU and 24v fans, then yes, you can use them without any issue, you'd simply need to place the jumper onto the V_FAN and VIN pins which will bridge the VIN voltage of 24v to the fan circuit.

[JimPBarber]

@phaedrux Sweet!!! Thank you very much!