Main config file for core XY [solved]
-
Currently configuring a coreXY machine, from the documentation i am supposed to add "M667 S1 ; switch to CoreXY mode" to the main configuration file in the movement section.
I assume that we are talking about "config.g" and the movement section is just a section that the user create using a comment and calling it movement section or whatever.
Is there an order to respect when creating this section or it can be anywhere in the file?Thank you
-
@buj have you seen this?
https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCoreXYPrinter
The commands are executed in order from config.g and usually the order does not matter. Though there are a few cases where it makes a difference.
If you start with the rep rap configurator everything will be where it should be and you can make adjustments from there.
-
- The main config file is in fact "config.g"
- The movement section was created by adding a commented line ";movement section" followed by the required commands...
