M581 Trigger does not work at all for me
-
Hello!
I connected a switch to E0-endstop.
The LED is flashing, if I push the button.This is what i tried so far:
M581 E0:1:2 S1 T1 C0
M581 E0:1:2 S0 T1 C0
M581 E0 S1 T1 C0
M581 E0 S0 T1 C0
I created the file "trigger1.g" with a M117 command in it.
I does not trigger it...
https://www.youtube.com/watch?v=VGy1r6YKb5M
Edit: Okay, an emergency stop with "T0" works...
-
https://duet3d.dozuki.com/Wiki/Gcode#Section_M581_Configure_external_trigger
"Trigger number 0 causes an emergency stop as if M112 had been received. Trigger number 1 causes the print to be paused as if M25 had been received. Any trigger number # greater then 1 causes the macro file sys/trigger#.g to be executed."
-
Oh fk... Ty i've misread the documentation. ty very much!
-
Easily done, no worries.