Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Changing Z-Offset Calibration Steps

    Scheduled Pinned Locked Moved Solved
    Tuning and tweaking
    2
    3
    140
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Leo-Danielundefined
      Leo-Daniel
      last edited by

      Hello,

      I have been calibrated my machine before and the options for the z-offset calibrations had been plus-minus, 0.02, 0.5, 1, 25, and 50. Recently while recalibrating the smallest step (0.02) changed to 0.05 and my 1 step changed to 5. Is there a way I can manually adjust these numbers?

      Capture.PNG

      89e2db73-6d52-4c0c-a379-f94c2d68bab8-image.png

      Thanks for any help!

      1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt
        last edited by fcwilt

        Hi,

        In the DWC you can right-click on one of the existing "jog" values for any axis and it will popup a dialog asking for a new value.

        Frederick

        Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

        Leo-Danielundefined 1 Reply Last reply Reply Quote 2
        • Leo-Danielundefined
          Leo-Daniel @fcwilt
          last edited by

          @fcwilt It worked. Thank you so much!!

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined Phaedrux marked this topic as a question
          • Phaedruxundefined Phaedrux has marked this topic as solved
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA