Trying to find .step files for the Roto Filament Sensor

Notepad

I'm currently mocking up a new hot-end design, and I have been looking for the dimensions of the Roto filament sensor & regular magnetic filament sensor, and I cant seem to find them on their respective docs pages.
https://docs.duet3d.com/Duet3D_hardware/Accessories/Roto_Filament_Monitor

Do we know if the .step files are available for this yet?

droftarts

@Notepad Tony is away at the moment, I'll ask him to post it when he gets back. (@T3P3Tony)

Ian

Notepad

@droftarts
Thanks for the heads up!

Notepad

@droftarts Any idea on an ETA when @T3P3Tony gets back?

droftarts

@Notepad Did you find the regular magnetic filament monitor files? They're here: https://github.com/Duet3D/FilamentMonitors/tree/master/Filament_Monitor_Magnetic

I've sent @T3P3Tony a reminder about the Roto one, but he might need to talk to E3D first about releasing the files.

Ian

Notepad

@droftarts Yup, already found the original MFM files. Its particularly the Roto one I'm looking for as I'm currently making some tight fitting surrounds which needs to butt-up against the monitor.

If it makes it easier, we can take this to emails instead as I already have NDAs with E3D and have access to various "DO-NOT-SHARE" files.
Posting on here was more of a question to see if the GitHub needed updating, I didn't consider if there might be NDAs in place

T3P3Tony

@Notepad i have uploaded it here:
https://github.com/Duet3D/FilamentMonitors/tree/master/Roto_Filament_Monitor/enclosure

Notepad

@T3P3Tony Very much appreciated.
Thank you!