Sharing my confing for Creality K1
-
I came here with 0 knowledge about control systems and you guys made my journey of converting my Creality K1 printer possible. I don't think that I would be able to do it on my own without your help. So as a thank you I just want to share my config files that could maybe be helpful for someone who might find himself in a similar situation like I was few months ago.
I run the factory setup of the printer, only thing I have removed were the load cells on the printer used for homing the machine and I run an IR Z-probe instead.
Config and homing files:
homeall.g config.g homez.g homey.g homex.gSome prints I am getting with the duet controler.
You can also check how it is pritning here:
https://www.youtube.com/shorts/4Fwqjc0oUp0 -
@qlqlo I really dont understand why you want to spend lot money on duet to put in a klipper printer ??
-
@Zoltan3D some people may have work flows around Duet they use on other machines and prefer consistency. Some may prefer the standalone operations of RRF over Klipper's SBC dependency. Some people may prefer the reliability of Duet hardware. Some people may prefer DWC over the Moonraker front ends ....
many possible reasons, and as often in a hobby involving building stuff, the answer to 'why?' often is 'why not?'