Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    6HC Bed Heater

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    44
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Kiwi3Dundefined
      Kiwi3D
      last edited by

      Gents.

      Running 24V Heated web on Switchwire.
      Bed is on Out0, I am assumin gI have to run 24V into Out0 Power IN
      13c3e0aa-ae04-481b-948e-2104964039b6-image.png

      Extract from config.g as follows
      ; Heated bed
      M950 H0 C"out0" T0 ; create heater #0
      M140 P0 H0 ; configure heated bed #0
      M307 H0 B0 R0.568 K0.333:0.000 D2.09 E1.35 S1 ; 27/07/2024
      M143 H0 S120 ; set temperature limit for heater 0 to 120C

      Cheers

      Ray

      droftartsundefined 1 Reply Last reply Reply Quote 0
      • droftartsundefined
        droftarts administrators @Kiwi3D
        last edited by

        @Kiwi3D yes, that’s correct, VIN needs to be supplied to OUT0 POWER IN terminals. Config looks correct, though always a good idea to tune the heater.

        Ian

        Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

        Kiwi3Dundefined 1 Reply Last reply Reply Quote 0
        • Kiwi3Dundefined
          Kiwi3D @droftarts
          last edited by

          @droftarts

          Thank you for confirmation. PID in progress now

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA