how the heating control operates

jay_s_uk

@oliof he has the tools setup as T1 and T2

@luca-Massimiliano said in how the heating control operates:

; Tools
M563 P1 S"LUCA1" D0 H1 F0 ; define tool 1
G10 P1 X12.8 Y3.9 Z0 ; set tool 1 axis offsets
G10 P1 R0 S0 ; set initial tool 1 active and standby temperatures to 0C
M563 P2 S"LUCA2" D1 H2 F0 ; define tools 2
G10 P2 X-12.8 Y3.9 Z0 ; set tool 2 axis offsets
G10 P2 R0 S0 ; set initial tool 2 active and standby temperatures to 0C

oliof

@jay_s_uk well ok then (-: That'll confuse the average slicer tho

luca Massimiliano

@jay_s_uk
I inserted t1 and t2 without anything else and it works, but I never did it in previous versions and it worked anyway, has it been changed in this version?

luca Massimiliano

@oliof
now I try to send a print with slicer,

jay_s_uk

@luca-Massimiliano you shouldn't insert both of them into the config, just one of them.
you can only have one active tool at a time.
and no changes i'm aware of in that area for ages

luca Massimiliano

@jay_s_uk Now I try again but with a declared tool if activated first the second one doesn't work

luca Massimiliano

@luca-Massimiliano
I had version 3.2.2 before and didn't declare the first extruder

jay_s_uk

@luca-Massimiliano again, you can only have one tool active at a time. if you want to use the other tool, send its T number in the console.
Your slicer should send "T1" and "T2" when it wants to swap tools

luca Massimiliano

@jay_s_uk
Could you help me find the extrusion declaration in the manual.

droftarts

@luca-Massimiliano

Could you help me find the extrusion declaration in the manual.

https://docs.duet3d.com/User_manual/Reference/Duet_Web_Control_Manual#tool-control
https://docs.duet3d.com/User_manual/Reference/Duet_Web_Control_Manual#extrusion-control

Ian

luca Massimiliano

This post is deleted!

luca Massimiliano

This post is deleted!

luca Massimiliano

@jay_s_uk
OK I THINK I HAVE SOLVED IT THANK YOU, I HAVEN'T FOUND ANYTHING IN THE MANUAL THAT INDICATES YOUR SUGGESTION