how the heating control operates

[oliof]

@jay_s_uk well ok then (-: That'll confuse the average slicer tho

[luca Massimiliano]

@jay_s_uk
I inserted t1 and t2 without anything else and it works, but I never did it in previous versions and it worked anyway, has it been changed in this version?

[luca Massimiliano]

@oliof
now I try to send a print with slicer,

[jay_s_uk]

@luca-Massimiliano you shouldn't insert both of them into the config, just one of them.
you can only have one active tool at a time.
and no changes i'm aware of in that area for ages

[luca Massimiliano]

@jay_s_uk Now I try again but with a declared tool if activated first the second one doesn't work

[luca Massimiliano]

@luca-Massimiliano
I had version 3.2.2 before and didn't declare the first extruder

[jay_s_uk]

@luca-Massimiliano again, you can only have one tool active at a time. if you want to use the other tool, send its T number in the console.
Your slicer should send "T1" and "T2" when it wants to swap tools

[luca Massimiliano]

@jay_s_uk
Could you help me find the extrusion declaration in the manual.

[droftarts]

@luca-Massimiliano

Could you help me find the extrusion declaration in the manual.

https://docs.duet3d.com/User_manual/Reference/Duet_Web_Control_Manual#tool-control
https://docs.duet3d.com/User_manual/Reference/Duet_Web_Control_Manual#extrusion-control

Ian

[luca Massimiliano]

This post is deleted!

[luca Massimiliano]

This post is deleted!

[luca Massimiliano]

@jay_s_uk
OK I THINK I HAVE SOLVED IT THANK YOU, I HAVEN'T FOUND ANYTHING IN THE MANUAL THAT INDICATES YOUR SUGGESTION