state.status says processing while it is actually printing

[Aurimas]

once again 3.5.0-rc2
When its idle it reports that it is idle.
When it is printing it says processing - is it supposed to be like this?

[OwenD]

@Aurimas

Yes, that is correct
DWC shows "printing" but the actual status is "processing" whilst there iss job file running, as this includes heating etc.

See docs here for all possible status types
https://github.com/Duet3D/RepRapFirmware/wiki/Object-Model-Documentation#statestatus

[Aurimas]

@OwenD great - thank you