Link to SZP documentation from blog is broken

oliof

Hi,
the SZP blog post links to the documentation at https://docs.duet3d.com/e/en/Duet3D_hardware/Duet_3_family/Duet_3_Scanning_Z_Probe but following that link yields an "Unauthorized" message. The spurious e/ in the path needs to be removed to fix it.

oliof

other documentation about the Z Scanning Probe is also hidden behind an access forbidden, i.e. https://docs.duet3d.com/en/User_manual/Tuning/scanning_z_probe_calibration

droftarts

@oliof Thanks for pointing these out. I can't change the blog entry (the link goes to the 'edit' page), so I'll get @T3P3Tony to do that. The calibration page isn't published yet as it hasn't been written. I think that's one of my tasks over the next couple of days.

Ian

T3P3Tony

@oliof thanks, the incorrect link should be fixed.

droftarts

@oliof I have updated these pages with info on connecting SZP and accelerometer, and written the SZP calibration page:
https://docs.duet3d.com/en/Duet3D_hardware/Duet_3_family/Duet_3_Scanning_Z_Probe
https://docs.duet3d.com/en/Duet3D_hardware/Duet_3_family/Duet_3_Roto_Toolboard
https://docs.duet3d.com/User_manual/Tuning/scanning_z_probe_calibration

I'll check them when I get an SZP and Roto, hopefully early next week.

Ian