EXTRUSION PROBLEM WITH 1LC TOOLBOARD
-
I believe and hope I have solved the problem.
It was a set of factors that led to a progressive underextrusion caused by wrong parameters in the slicer.
However, I put heatsinks on the MCU and Driver, with the addition of a 30x30mm fan.
It was also crucial to have made the PEI surface rough, this allowed the material to stick perfectly to the surface and allow excellent prints.
Now everything seems to work...
You can mark it as solved, thanks.!
-
undefined jay_s_uk marked this topic as a question
-
undefined jay_s_uk has marked this topic as solved
