Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Print auto-paused due to low voltage

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    132
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Joyrideundefined
      Joyride
      last edited by

      Installed Duet2 Ethernet in my Modix BIG60. Connected everything according to online instructions.
      Everything kind of works BUT almost at every print it stops with message "Print auto-paused due to low voltage". Initially i thought there are real issues with power supply. I bought UPS, no changes. I recorded PC screen with VIN on it - it stops printing with this message when VIN is exactly 24 or even 24.1. Any ideas? Can it be defective Duet 2 board?

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Post your config.g. You can configure the power loss detection threshold.

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA