Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Creatbot D600 Pro conversion to duet board

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    3
    201
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • BeauNoonundefined
      BeauNoon
      last edited by

      Hey there

      I've seen a couple of posts mentioning about upgrading a Creatbot D600 pro to a duet board to improve the machine and I'm very keen to do it.

      If I was to buy a Duet 3 Mainboard 6HC and Paneldue is there anything else I would need?

      Then would I just follow this document to adapt for the D600? https://duet3d.dozuki.com/Wiki/Going_from_Marlin_on_Arduino_to_RepRapFirmware_on_Duet

      Any help or advice is very appreciate

      Thanks
      Beau

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Yes that guide would be a good start. You'd need to determine if the hardware included with the D600 is normal generic parts or if there is something proprietary or exotic. Is the Z probe able to interface with the Duet, are the heater cartridges standard, are the thermistors unique in some way, etc.

        Z-Bot CoreXY Build | Thingiverse Profile

        Shokiundefined 1 Reply Last reply Reply Quote 0
        • Shokiundefined
          Shoki @Phaedrux
          last edited by

          This post is deleted!
          1 Reply Last reply Reply Quote 0
          • Shokiundefined Shoki referenced this topic
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA