Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    E steps measuring

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    2
    3
    157
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • rexxundefined
      rexx
      last edited by

      Hey Guys,

      I want to set my esteps xyz are done now and would like to know if i can or how to run E without heat on as i have DD ish hot end 3:1 i would remove the nozzle and measure out the nozzles hole to calcucate the steps could somone give the Gcode to move e without heat needed momentarily while i measure it up?

      on 6HC duet3

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @rexx
        last edited by

        @rexx

        Lookup command M302 - it allows you to enable extrusion when cold.

        And you also need to have a tool active. For a one tool printer the command T0 will do the job.

        And you can remove the nozzle or disconnect the extruder from the hotend.

        Frederick

        Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6

        rexxundefined 1 Reply Last reply Reply Quote 1
        • rexxundefined
          rexx @fcwilt
          last edited by

          @fcwilt
          Thank you !
          Cheers from the greenback guy,

          1 Reply Last reply Reply Quote 1
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA