Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    [3.4.1-pre2] Issue with extrusion

    Scheduled Pinned Locked Moved Unsolved
    PanelDue
    2
    3
    169
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • oozeBotundefined
      oozeBot
      last edited by oozeBot

      There is an issue with extruding from Extrusion panel on the PanelDue. The first time you enable the hot end heater and extrude from the Extrusion panel, the extruder moves at about 200mm/s (guessing) - even when selecting 2mm or 5mm. Selecting the same move again results in the correct speed. It is repeatable by turning off the heater, turning it back on, and then extruding - and only ever happens the first time.

      This is happening with Duet 3/SBC running 3.4-rc2. Will update to 3.4 stable and test soon, but I haven't been able to get it to happen from DWC, so I'm thinking it's something in the PanelDue.

      Please let me know if you need more info or a quick video of the issue.

      1 Reply Last reply Reply Quote 1
      • oozeBotundefined oozeBot marked this topic as a question
      • oozeBotundefined
        oozeBot
        last edited by

        This is still occurring with 3.4 stable. I believe it must be something in the PanelDue's code but have not had time to review it.

        1 Reply Last reply Reply Quote 0
        • mfs12undefined
          mfs12
          last edited by

          do you experience this problem with DWC as well?

          Visit me on github at https://github.com/mfs12/

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA