Configurator won't select Smart Effector
-
Option is greyed out and I can't select it? Earlier in the process I did select z probe pin and modulation pin, but it won't let me select the option on the bottom of the endstop page?
-
@clearlynotstef you should select a modulation pin (used to change the sensitivity on the smart effector) in the I/O Mapping page.
-
@t3p3tony I did (z probe.mod or something to that effect)
-
@clearlynotstef ahh odd. I just tested it
And with those defined it came up as an option.
-
@t3p3tony I'll try over from scratch later, when I did the same thing and got to endstops it wouldn't select the smart effector. I also had problems on that page selecting "high" for the endstops at the top, when I refreshed twice then I was able to. We'll see how it goes from scratch.
