Duex5 Testers

joestefano

Add me to the list please. what is the time frame on shipping assuming initial testing goes well?

T3P3Tony

UPDATE:

We will be emailing all those who have expressed interest in the next couple of days (before the end of Tuesday 18 Oct) to let you know the cost and planned delivery schedule. Also you will need to confirm your details so we can raise PayPal invoices.

For those who have expressed interest through the forum only, I will use your forum email address so please check this one if it's not your primary address.

iDevelo

I'll take one if you have any spare. I will use it to test out IDEX on my surrender build.

jmjcoke

I will buy one.

Adamfilip

Sign me up.

mjhall29

Should i have heard anything yet ?

T3P3Tony

The email is sitting in my draft folder just waiting to confirm one more detail and it will go out. Hopefully this morning

T3P3Tony

UPDATE 2: I have emailed those who expressed interest. If you don't have the email then let me know (info@duet3d.com).

Matt

If I'm not too late I'd love to get in on the fun!

Sparks

I didnt get it Tony…? (no email)

T3P3Tony

UPDATE 3: I have received a lot of emails, thank you all for your responses, I have not had time to email back to you all individualy yet. I will collate the list this afternoon and email an update then.

tangent1001

Please count me in as well.

T3P3Tony

UPDATE 4: Thanks for everyone who has now responded. We will start sending out the paypal invoices today but as there is a lot going on we might not get them all out for a couple of days.

When you receive yours please pay promptly as we do have a reserve list.

Qanelin

Is there still room to get on the list?

T3P3Tony

@Qanelin - I am running a reserve list in case anyone changes their mind

Qanelin

I would like to be added then (as long it is ok being in the US). I recently purchased the DuetWifi and my printer has the diamond hotend so I need 3 extruder capabilities.

timcurtis67

Tony,
Did you send out the Paypal invoices yet? I haven't received it yet but I did get the email saying I was one of the ones selected.

I'm really looking forward to getting a hold of the new board, lots of plans for it.

dvmourik

We are always ready to test things out!

deckingman

For anyone that's interested, I've designed an enclosure that will take the Duet Wifi plus Duex expansion board and put it on Thingiverse. http://www.thingiverse.com/thing:1859048

It takes the two boards but with them mounted one above the other, as if they were mounted back to back and joined at the Vin connector but then opened out like a book. It takes two 80mm fans internally to blow air on to the back of the boards and exhaust through slots top and bottom. I included the OpenScad file so feel free to play around with it. Warning - it's 290mm x 140mm so you'll need a biggish build plate.

Edit. If you mount the boards this way, you might need a longer ribbon cable and with a twist in it.
HTH

Ian

iDevelo

@deckingman:

For anyone that's interested, I've designed an enclosure that will take the Duet Wifi plus Duex expansion board and put it on Thingiverse. http://www.thingiverse.com/thing:1859048

It takes the two boards but with them mounted one above the other, as if they were mounted back to back and joined at the Vin connector but then opened out like a book. It takes two 80mm fans internally to blow air on to the back of the boards and exhaust through slots top and bottom. I included the OpenScad file so feel free to play around with it. Warning - it's 290mm x 140mm so you'll need a biggish build plate.

Edit. If you mount the boards this way, you might need a longer ribbon cable and with a twist in it.
HTH

Ian

Looks really neat!

How is the airflow if the fans suck air through? I find less turbulence and the temps in the enclosure lower.