M308 for Keenovo thermistor

[Falkia]

HI,
Need help to set the parameter for the thermistor at the bed.
Data from Keenovo:
NTC 100K thermistor Beta 25/50 3950K-1%.
Thermistor table

Running FW 3.4-b7 on Duet2 WiFi.

Thanks
Fredrik

[Rushmere3D]

@falkia

This is what I use for my Keenovo bed.

M308 S0 P"temp0" Y"thermistor" A"Keenovo Bed" T100000 B3950

[Falkia]

@rushmere3d Thanks.

[Rushmere3D]

@falkia No probs, obviously change the pin name to that of the Duet 2 should have said that :).