CoreXY movement issue
-
My printer has been working for a few days,
I am finally able to print, learning about PETG, but last night … something really weird happened...
IMO, doesn't mean that I am right, my printer is switching from M667 S1 to something else...
On the video, you will see (2) Home All & (1) Bed calibration
-
home X = smooth CoreXY movement
-
home Y = staggered movement and strong noise
-
HomeZ = smooth CoreXY movement
-
Second Home All = same thing
-
Bed calibration = staggered movement and strong noise
https://youtu.be/FP3qKUyUTaY
The noise is from the motor skipping the GT2 belt.I used to get that issue rarely when I would start the printer, all I had to do was a reset and then everything was working…
Any one knows what this could be and how to fix it?
Thanks
-
-
My house and (or) board are (is) seriously haunted…
I restarted my printer and now it seems to be working perfectly...
