Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Issues with CURA slicing for DUET2

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    2
    2
    130
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • karekaundefined
      kareka
      last edited by

      I ugraded my DUET2wifi firmware for v3.2.2 and the cura slicing is not start the cooling fan. It generates M106 S255 (for 100% speed) and this version requires M106 P0 S255. It is necessary to specify the configure port. Is there any way to configure CURA for this? Help is most welcome!

      T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
      • T3P3Tonyundefined
        T3P3Tony administrators @kareka
        last edited by

        @kareka set your tool up to have your part cooling fan specified as part of the tool and then the M106 S255 should work then that tool is selected:
        https://duet3d.dozuki.com/Wiki/M563
        e.g. (adapt this for your existing M563 command):

        M563 P0 D0 H1 F0

        www.duet3d.com

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA