Help for translation needed
-
@mfs12 I thin I'm done, there is still a few sentence in English but getting a proper translation is not easy (ex. Heaters comb., feedrate...)
I added some comments like "need context" to make sure I can provide a correct translation.Let me know when it's integrated to a build and I will load it into one on my printers.
-
@mfs12 Please change in german in the setup page to "Heat's kombiniert" and "Heat's nicht komb."
Sorry for the late reply!Edit: Sorry again, in the Status page to "Geschw.", Geschwindigkeit is to long.
-
Hey @cosmowave,
already updated Heat entries. And set Tempo/Geschwindigkeit to "Speed".
As i also speak german
I think speed is a ok-ish compromise. Geschw. is unclear, as is Tempo.Thanks a lot for your help!
Visit me on github at https://github.com/mfs12/
-
This is the pull request where I merge all your suggestions and correction together.
https://github.com/Duet3D/PanelDueFirmware/pull/139
closed Cleanup translations #139
-
So far we reviewed english (obviously), german, spanish and french.
A big thanks to all the helping hands!
Visit me on github at https://github.com/mfs12/
-
@mfs12 Did you included the new translations into PanelDue-3.4.0-pre2?
Thanks
-
Hey @Fred-Y, yes, translations where added. Although there was only one suggested change in french. Or did i miss something. I found just one comment.
And this entry got meanwhile obsolete for all languages.
Visit me on github at https://github.com/mfs12/
-
On the one hand 5.0i and 7.0i are separated, is there a reason? what do they change?
No, just the new build process. I thought it's nice to have explicit builds for every device. But it looks like there are going to be merged again into one image.
-
@mfs12 I'm not familiar with GitHub, I added many corrections, I'm not quite sure why you didn't see them - they are all "Pending".
I have surely missed something
Let me know how to fix this and I will do it asap.
-
@Fred-Y this is weird. never saw this "pending" status before.
Did you use this link?
https://github.com/mfs12/PanelDueFirmware/pull/2/files
can you share the link from where you took the screenshot?
draft Review translations langs #2
Visit me on github at https://github.com/mfs12/
-
@mfs12 It's coming from the same link you posted above
-
@mfs12 I think I figured out!
I had this button to submit my review
Can you see my comments now?
-
@Fred-Y yes, now everything appeared.
It will get in with the next release.
Visit me on github at https://github.com/mfs12/
-
@mfs12 Perfect!
I will try to install it as soon as it is released and switch to French to make sure it looks good. -
@Fred-Y i commented some stuff.
Status values must not be longer then 15 characters otherwise they are cut off.
Please check
And here are the actual changes i did so far.
draft Review translations langs #2
closed Strings: updated french translation #205
Visit me on github at https://github.com/mfs12/
-
Translate.txt
Translation into Russian. -
Hey @romanvin, it would be helpful to comment on the changes at github. Otherwise managing all the changes will be pretty hard.
Please check
https://github.com/mfs12/PanelDueFirmware/pull/2#issuecomment-909913840
draft Review translations langs #2
-
@mfs12 I adjusted the status, they should all be 15 chr or less.
Let me know if I missed something -
@RomanVin thanks for your help!
I created a pull request with most of you changes. I two changes i didn't take because they were too long.
If you want to have a last look on the changes feel free to comment in the pull request.
https://github.com/Duet3D/PanelDueFirmware/pull/209/
closed Strings: updated russian translation #209
-
@mfs12, do you use an online service to manage the collaborative translation? They can be very handy. E.g https://crowdin.com/page/open-source-project-setup-request
