Heaters not working, strange message

jay_s_uk

@tomasl Duet Web Control i.e. the web interface

Phaedrux

Duet Web Control. The web interface you connect to in your browser.

Phaedrux

@tomasl said in Heaters not working, strange message:

What is DWC?
In the download there is a folder called "sys" whewer the bin-file is located together with the .g files and config.json
there is also a folder named "www" containing, what I guess the web-interface

The easiest way to update everything is to upload the combined zip file release. It contains all the firmware and DWC files, etc. It will place the files where they need to be and you don't have to worry too much about it.

TomasL

Well will obviously do that, when I'm on site.

TomasL

It seems that the config tool didnt use the last firmware, so I was on version 3.0

TomasL

I did an update to version 3.3, now absolutly nothing is working.
I can connect with an terminal, but I cant get WiFi working.

M115 
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.3 ELE
CTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2021-06-15 21:45:03
ok
M552 
WiFi module is disabled
ok
M587 S"MySSID" P"xxyyzz"
Error: M587: Failed to add SSID to remembered list: WiFi module is disabled
ok
M552 S1
ok
M552
WiFi module is being started
ok
M552
WiFi module is being started
ok
M552
WiFi module is being started
ok
M587
Failed to retrieve network list: another SPI transfer is pending
ok
M587
Failed to retrieve network list: another SPI transfer is pending
ok

The blue LED on the WiFi module is lit.

jay_s_uk

@tomasl reflash the wifi firmware.
make sure its in a folder called firmware on the root of the SD card and run M997 S1

TomasL

How do I reflash the firmware, and where do I find it?

jay_s_uk

@tomasl https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/DuetWiFiServer.bin
https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Updating_WiFi_firmware

TomasL

Ok, now I have the WiFI working, thanks, but no tempeature sensors, despite config.g hasn't changed.

Oops, sorry, it was the "extra sensors" that was displayed, not the actual sensors.
Now, the message "generic.heaterStates.disconnected" has dissapeared.

jay_s_uk

@tomasl can you post a screenshot of what you're seeing and can you confirm your current config.

TomasL

It seems to be sorted, the view of extra heaters was selected, not the tool heaters.

Phaedrux

Occasionally when updating the wifi server it will fail silently. Reflashing again using M997 S1 usually fixes it, as you've found. Sorry about that.

Glad to hear the rest of the update seems to have gone well and you're DWC is now back in sync. I suspect that what may have happened was the opposite of what I originally expected. The DWC files were updated, but your firmware was not, so there was a cryptic message for the heater since DWC wasn't getting the response it expected from the firmware.

You can check that you have 3.3 firmware and DWC now by looking at the Settings > General and Settings > Machine Specific tabs in DWC.