Anybody wants a stepper motor analyzer?
-
Is there any possibility to sign up on the wait list?I like to have one of those analyzer
Thanks
-
@sotidii, yes, please do, and make sure to purchase at http://amazon.com, and not from international amazon websites. (no need to create a new account, international accounts are good at http://amazon.com).
I do have 9 units ready. Shipping boxes are on on order, should arrive in few days.
@1ri, I added you to the list.
-
Gift card sent, thanks!
-
@zapta
It seems to me that @duke23 is me and there was a small mistake in the nickname but I sent you a gift card and shipping address -
@dudek23, yes, that's you. I copied it manually and didn't understand why the forum software didn't convert it to a link.
-
@zapta Gift card sent, OK?
-
Gift card sent via private chat
-
-
5 units were shipped today to the people below. Should arrive with 1-2 weeks in the US and 2-4 weeks internationally.
@Sotidii
@ccs86
@Dudek23
@PCR
@fmaFor the next people in line for this batch, if you are still interested please send me via IM you shipping info. Otherwise will move to next people.
After this batch I plan to have at least one more batch of 9 (already have parts on order). Not sure if/when will do additional batches to fill the demand, but will help anybody that want to make them, including commercially, which is relatively simple if you are handy with electronics. Could also be a great Kickstarter campaign since the R&D is done and free.
-
@zapta Mailing address and gift card info sent via private chat.
-
@zapta Are you still selling them? I just read your post and would gladly buy one!
-
Which e-gift should I choose? There are tons of stuff, I don't really understand what are the differences...
-
It seems that's only different logos... Am I right?
-
@fma, this one should work
https://www.amazon.com/gp/product/B07P76HM3B/ref=ppx_yo_dt_b_asin_title_o03?ie=UTF8&psc=1
Don't worry about the design, just enter the amount and make sure quantity is 1, then add to the cart and pay.
Shortly after you will get an email with a link to download the 'card' to print. That card will have a claim code which is all I need.
They should have a 'no-nonsense' version of their gift card, without all the fluff.
-
This post is deleted! -
@zapta: When do you need the gift card, now, or just before you ship? It doesn’t matter to me, let me know which you prefer, cheers.
Beano
-
-
@bot, @beano I prefer to get the payment around the time I ship, just in case something will go wrong and I will not be able to ship.
As for amounts, now I that have more experience with the shipping rates, so let's round the totals (including shipping) for future payments:
US: $40
Other countries: $45
-
Arrived already, thanks again man!
I gave it a quick check with the printer on it's side and it works beautifully. I need another cable to use it properly though.
Maybe you guys can help me out. My familiarity with the various connector types is low.
I had some spare stepper cables like this, so I chopped off the white end and terminated with the connectors zapta sent (on the right). Those plug right into my Duet board, and the black connector into the analyzer.
But, I'm left with a very short length of loose cable after unplugging the motor that I need to get out from under the machine. Basically a male version of the connector on the right. Anything easier that in missing?
-
@ccs86, the connector on the right is KF2510 4 pins, it's a clone of a Molex connector, KK or something like that.
You can get KF2510 connector on Aliexpress, Amazon and many other places, or you can get the Molex ones from Digikey and similar.
https://www.amazon.com/GeeBat-Connector-Headers-Terminals-Housing/dp/B01M69TKAM
https://www.aliexpress.com/item/32963887703.html
https://duet3d.dozuki.com/Wiki/Connector_and_spare_part_numbers
I solder the wires to the male side and use heat shrink to cover the exposed solder points.