DWC 3.1.1

[Phaedrux]

I'm not sure what you're saying. The translation was not very good this time.

THE PROCEDURE DOES NOT STOP HEATER 1 SWINGS BETWEEN 23.4 23.8

PID tuning can take a long time.

[luca Massimiliano]

ESATTO , 20 30 MINUTI PER UN RISCALDATORE , H1 LAVORA PER 60 MINUTI O PIU' . IN TUTTE LE CALIBRAZIONE CHE HO FATTO, LA TEMPERATURA SALIVA AL MASSIMO .
ORA LA TEMPERATURA VA MASSIMO A 24 GRADI MI STUPISCO . ORA STA LAVORANDO

[Phaedrux]

M303 H1 S

You need to set a temperature after the S

M303 H1 S200

[luca Massimiliano]

AVEVO CAPITO HE S NON IMPOSTATO ANDAVA ALLA MASSIMA TEMPERATURA .GRAZIE PROVO SUBITO

[luca Massimiliano]

This post is deleted!

[luca Massimiliano]

@Phaedrux PERFETTO
GRAZIE

[luca Massimiliano]

NON HO CAPITO . HO FATTO G 29 LA MACCHINA HA LAVORATO MA NIENTE GRAFIGO RAPPRESENTATO COME SI VEDE. UNA VOLTA HA FATTO GRAFICO CON UN G 29 POI NON PIU'

gives me this error Error: Bad command: Configuration Tool v3.2.3 on Sun Mar 14 2021 01:38:34 GMT + 0100 (Central European Standard Time)

It sounds like you are missing a ; to commend out that line?

NON COMPRENDO SCUSA

[luca Massimiliano]

[luca Massimiliano]

MI HA MANDATO QUI NON SO SE HA IMPORTANA PENSO RIGUARDI LO SPESSORE E IL MATERIALE, DEVO CREARE UN FILE

[Phaedrux]

Create a folder on your SD card called menu and another called filaments

Configuration Tool v3.2.3 on Sun Mar 14 2021 01:38:34 GMT + 0100 (Central European Standard Time)

Check your config files for that line. Some where there is a file that has that line and it's missing a ; at the start to mark it as a comment.

[luca Massimiliano]

; generated by RepRapFirmware Configuration Tool v3.2.3 on Sun Mar 14 2021 01:38:34 GMT+0100 (Ora standard dell’Europa centrale)

; IN GONFIG.G OK

Configuration Tool v3.2.3 on Sun Mar 14 2021 01:38:34 GMT + 0100 (Central European Standard Time)

Check your config files for that line. Some where there is a file that has that line and it's missing a ; at the start to mark it as a comment.

[Phaedrux]

What are you doing when that error message shows up?

[luca Massimiliano]

HO FATTO MENU FILAMENT IN SD CARD

[luca Massimiliano]

ECCO

[luca Massimiliano]

SE TOCCO PIANO-SONDATO .CSV SI BLOCCA TUUO.

[luca Massimiliano]

This post is deleted!

[luca Massimiliano]

DA L ERRORE QUANDO ARRIVA SUL PIATTO ED ESTRAE LA SONDA HO UN BBLTouch

[Phaedrux]

Please post all your config files. config.g homeall.g homex.g homey.g homez.g homedelta.g bed.g deployprobe.g retractprobe.g

[luca Massimiliano]

@luca-Massimiliano

[Phaedrux]

Do you have a file called mesh.g in the system folder?