Da Vinci Pro 1.0 config file

Marco3920

It would be amazing if someone has a config file of an Da Vinci Pro 1.0 Upgrade. I'm not quit sure which settings I should use for the stepper motors.
Thanks for help!

Phaedrux

Try a search for some info? Or perhaps ask a more specific question? What settings are you confused about?

https://forum.duet3d.com/search?term=Da Vinci Pro &in=titlesposts&matchWords=all&sortBy=topic.lastposttime&sortDirection=desc&showAs=posts

Marco3920

Well I already did that before even thinking to post something here..

My problem is that I don't find exact information about the used current, microstepping etc. for the axes motors or the extruder motors.
The models are:
Extruder 0: 17PM-K342BG03CN
Extruder 1: 17PM-K142BN07CN
X Motor: KV4239-T2B011 (KV4239-T2BX047)

Achsen Motoren.png

Even though the Model name is a bit similar I'm not quite sure if these data are the right and would like to compare the settings with someone who already did the upgrade (read some posts about others but unfortunately didn't find anything useful).