Duet3 Mini 3.2 firmware update fails, maybe?
-
@Phaedrux said in Duet3 Mini 3.2 firmware update fails, maybe?:
https://github.com/Duet3D/RepRapFirmware/releases/download/3.2/
I downloaded the UF2 file, uploaded it to the Duet, all seemed good.
Still reporting beta though. The date shown is 2020-11-15.
It is also reporting Duet WiFi Server 1.25 and DWC 3.2.0
Frederick
-
What does the M115 report?
-
In it's entirety:
FIRMWARE_NAME: RepRapFirmware for Duet 3 Mini 5+ FIRMWARE_VERSION: 3.2-beta3.2+1 ELECTRONICS: Duet 3 Mini5plus WiFi FIRMWARE_DATE: 2020-11-15
-
Can you try including this IAP file from RC1 and try again?
-
Also, I've just realized that the mini5+ firmware uf2 from the zip file is actually for 3.3 alpha. that's why it was different. Not sure yet if that was intentional or if it matters, but I just uploaded the full zip just now and that's the version it reports.
-
@Phaedrux Do I need a different UF2 file?
Frederick
-
@fcwilt I don't think so. But I'm not 100% sure. I went through the same process the other night when 3.2 final came out. I think I was on beta 4 though, and then RC1 and RC2 before going to 3.2 final.
I don't have any of the files from the betas, just RC1, 2 and 3.2 final. The beta releases have all been archived.
What files do you have in your /sys folder now?
The IAP files did go through a renaming from SDiap to SDiap32, so you maybe are missing SDiap? I know they can be renamed in certain cases because there were no changes other than renaming, but I'm not certain of the versions for that.
I have to run for a bit, but will check back later. -
@Phaedrux Files in SYS
-
@Phaedrux said in Duet3 Mini 3.2 firmware update fails, maybe?:
Can you try including this IAP file from RC1 and try again?
So with this bin file are you able to update with the uf2 from the 3.2 final release?
-
If I try to use the SDiap32 version of the file WITHOUT the SDapi version I get that error message about the missing file.
I renamed the file from SDiap32 to SDiap and tried again.
Now I have 3.3. alpha being reported.
This is fun.
Frederick
Printers: A FT-5 with the 713 upgrade bits, a custom MarkForged style, a small Utilmaker style, a small CoreXY from kit and a E3D MS/TC setup. Various hotends. Using Duets (2 and 3) running 3.4.6
-
So now if you upload the full zip file does it update correctly? At that point it should be good to go for future releases.
Things always get a bit tricky with beta releases and shifting IAP files.
-
@Phaedrux said in Duet3 Mini 3.2 firmware update fails, maybe?:
So now if you upload the full zip file does it update correctly? At that point it should be good to go for future releases.
Things always get a bit tricky with beta releases and shifting IAP files.
Do you mean go from 3.3 ALPHA back to 3.2 RELEASE?
I don't know - I will try.
Frederick
-
No change. M115:
FIRMWARE_NAME: RepRapFirmware for Duet 3 Mini 5+ FIRMWARE_VERSION: 3.3alpha ELECTRONICS: Duet 3 Mini5plus WiFi FIRMWARE_DATE: 2021-01-05
Is it the IAP BIN file or the UF2 file that has the version information?
Frederick
-
I just meant upload the whole zip to see if it works complain or change anything. I would expect it to stay at 3.3alpha
-
@Phaedrux said in Duet3 Mini 3.2 firmware update fails, maybe?:
I just meant upload the whole zip to see if it works complain or change anything. I would expect it to stay at 3.3alpha
No it worked without error but stayed at 3.3 alpha.
Anyway to get back to 3.2 release?
Frederick
-
@fcwilt said in Duet3 Mini 3.2 firmware update fails, maybe?:
Anyway to get back to 3.2 release?
I think the 3.3 alpha should be fine, but this is the loose firmware file included in the release for 3.2.
https://github.com/Duet3D/RepRapFirmware/releases/download/3.2/Duet3Firmware_Mini5plus.uf2
-
@fcwilt said in Duet3 Mini 3.2 firmware update fails, maybe?:
If I try to use the SDiap32 version of the file WITHOUT the SDapi version I get that error message about the missing file.
I renamed the file from SDiap32 to SDiap and tried again.They're given unique names so they can co-exist; is the version that goes with the currently running firmware that is requested when up/down-grading.
If you go back and forth, you might need more than one version, which is only possible if they have different names.
-
@bearer said in Duet3 Mini 3.2 firmware update fails, maybe?:
SDiap
the version that comes with the original files does not work correctly for upgrading.
see my linked post. dc42 posted a new version that works for normal upgrading.
-
@Veti said in Duet3 Mini 3.2 firmware update fails, maybe?:
@bearer said in Duet3 Mini 3.2 firmware update fails, maybe?:
SDiap
the version that comes with the original files does not work correctly for upgrading.
see my linked post. dc42 posted a new version that works for normal upgrading.
not sure how that invalidates saying "don't rename them" and "keep the previous version if going back and forth"
-
it does not invalidate them. i just said that the SDiap that came with the duet does not work correctly, so there is no point in keeping that.
