Preview version of CNC optimized DWC.

chimaeragh

@edwardp Can you have a look at this macro and see if it works for your implementation?

edwardp

@chimaeragh thanks for posting those. I am just working through the simplest Z-only probe initially (@Kane on the other thread has a version of the macro that is now working for me). Once we have the Z probe working reliably (and I understand the subtleties of why my original macro was incorrect) I will use these to explore the tool diameter measurements.

Cheers
E

Hagrid

@rilot Thank you

chimaeragh

Hi. I just saw that this project has been updated to DWC 3.3 rc1. Glad to know it hasn't been abandoned. I'll be getting a Neje laser module to attach to my CNC soon and will be coming back to RRF3

Sindarius

@chimaeragh I promise it is not abandoned I have a few other tasks which has taken up a bit of time. I plan on getting an XYZ probe plugin put in place when I am able to put some time into it. I have an OpenBuilds CNC with an XYZ touch probe that I want to get up and running as well.

cjm

@sindarius Not sure what I've done wrong, but I've just updated to 3.3.0-rc1 and the DRO and Jog plug ins appear to have disappeared?

Sindarius

@cjm I didn't include the plugins in this build. I need to post the DRO plugin and I'll update the Jog plugin which is normally available here https://github.com/Sindarius/DWC_Touch_Jog_Control

cjm

@sindarius Many thanks for the quick answer!

Sindarius

@cjm I found an issue where plugins were not starting properly with the previous version. There is a new release which resolves this issue.

https://github.com/Duet3D/DWC-CNC/releases/tag/CNC03-3.3.0-RC1%2B1

The updated plugins are available here
DRO
https://github.com/Sindarius/DWC_DRO_Plugin/releases/tag/0.2.0
Touch Jog Control
https://github.com/Sindarius/DWC_Touch_Jog_Control/releases/tag/0.2.0

chimaeragh

@sindarius second link is not working

Sindarius

@chimaeragh give it a shot now, I had to change the visibility of the repo.

chimaeragh

@sindarius Thanks. Working now

cjm

@sindarius Thanks very much - all seems to be working now.
The updated jog plug-in looks good too!

weed2all

@Sindarius I uploaded the touch jog and dro but it seems to get some sort of error when try to start them...I didn't had to much time into it but tomorrow I'll give it a new shot to see what's going on...I might need to do a fresh install of rrf and dwc as well...i will came back with news tomorrow...

Sindarius

@weed2all let me know. I have tested them with latest DWC-CNC and latest firmware 3.3-RC2

weed2all

@sindarius yes...it might shown the error because what I think is I'm still on the 3.2 firmware...not 100% sure...I'm at work now...in few hours when I get home I'll have time for testing again!

weed2all

@sindarius ok...now I have all working...just did an update from 3.2 to 3.3 rc2 and the dro plugin and touch plugin are starting now..

Sindarius

@weed2all glad to hear it is working

shante

Hello, im trying to install the gamepad plugin, but im getting "Prerequisites
Invalid plugin manifest " error. Can someone help me ? Thank you
Im on

Duet Web Control 3.3.0-rc1
Board: Duet 3 MB6HC (MB6HC)
DSF Version: 3.3-rc2
Firmware: RepRapFirmware for Duet 3 MB6HC 3.3RC2 (2021-05-11)

jay_s_uk

@shante have you enabled the third party plugin service?
https://forum.duet3d.com/topic/22054/firmware-bundle-3-3beta2-released/2