firmware and filling of DUET 2
-
Help. I can't understand why the printer's speed drops when printing in two colors
-
the extruder feeds the filament at a very high speed
-
We can't see what's happening, you'll have to show us the gcode being used. Everything in RRF is controlled by gcode, so if the printer is doing something, it's because it was commanded to with gcode. So show us the gcode and we can see what is happening.
-
[0_1603342686044_newtest2cveta.gcode](Uploading 100%)
-
@sergei
please wait after reaching 100% the file was not attached -
[0_1603343693346_newtest2cveta.gcode](Uploading 100%)
-
for some reason, an error pops up on the server
-
[0_1603346019893_бутылочка 2 цвета.zip](Uploading 100%)
-
https://cloud.mail.ru/public/4LcE/5uyj4ASrp
here is the link to the file