RFF3 Micro stepping

duetlover

Hi everybody

I'm using E3D Tool Changer with Duet Ethernet+Duex5, RFF3.

I'm trying to enable microstepping 1/16 for extruders.

At the moment the config.g have :

M350 E8:8:8:8 C8 I0

I tried:

M350 E16:16:16:16 C8 I0
and
M350 E16:16:16:16 I1 C8 I0

without success (not enough extrusion)

Did I made it wrong ?

Do I have to configure an other paremeter?

Thanks

Veti

did you change your steps per mm?

the first would be ok
the second should be
M350 E16:16:16:16 I1
M350 C8 I0

duetlover

Stupid guy I am...Did not change step/mm !

Thanks!

Phaedrux

If you're using x16 microstepping you should enable interpolation for the quiet and smooth motor operation. Not much reason to use anything but x16 with interpolation on the Duet Wifi.