DWC does not update Height Map
-
DWC 2 will not update the Height Map on screen unless I restart DWC. This seems to be new. I was upgrading hot end/extruder parts and off line for a month or so and things seem to have changed suddenly.
When I left off, to update the Map on screen I believe I would hit the Height Map button and it would refresh. It is not auto-updating either if that is what is supposed to happen now.
Thanks!
-
It would help to know what firmware version and DWC version you are using.
It should be either FW 2.05.1 and DWC 2.0.7 for RRF2, or FW 3.1.1 and DWC 3.1.1 for RRF3.
-
-
@Phaedrux said in DWC does not update Height Map:
It should be either FW 2.05.1 and DWC 2.0.7 for RRF2,
@comobileoutfitters Try updating to this combo.
Basically just upload this zip file as is to the /sys folder in DWC.
https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip
