Drives, Drivers, Endstop Pins?

[tmeryhew]

So what are these supposed to be set to? I have one micro switch per axis. Should I just stick with the "xstop", "ystop", "zstop" for these guys?

Also, I only have one extruder for right now. So that should be set to E0 yeah?

[fcwilt]

Hi,

The suggested wiring for micro switches is to use the NC and COMMON terminals.

As I understand it for this you would want xstop (pull-up), etc.

E0 is correct

Frederick

[tmeryhew]

@fcwilt Is there more documentation on those finer details? In the dozuki? Just not understanding how a man is supposed to know these things without being an engineer already!

[A Former User]

maybe https://duet3d.dozuki.com/Wiki/Connecting_endstop_switches can shed some light on it?